services

Offering authentic services for Borewell Drilling Services, thus meeting the varied needs of industrial, commercial, agricultural, construction and municipal applications. WE HAVE WIDE RANGE OF BORE WELL DRILLING SERVICES Bore Dia – 6″,8″,10″,12″,16″,20″ & more Bore Depth – 100 feet to 1,200 feet Type Of Machine 1. DIRECT ROTARY DRILLING (DR): The direct rotary drilling method was developed to increase drilling speeds and to reach greater depths in most formations. The bore hole is drilled by rotating a bit, and cuttings are removed by continuous circulation of the drilling fluid as a bit penetrates the formation. Applicable to alluvium type formation There are two types of rotary boring Open-Hole Core Drilling. 2. DOWN THE HOLE DRILLING (DTH): A down-the-hole drill, usually called DTH by most professionals, is basically a jackhammer screwed on the bottom of a drill string. Applicable to hard rock (and especially fractured hard rock) APPLICATION: Tubewell Drilling Development of Tubewell Ground Water Exploration

Well rock blasting is the controlled use of explosives to excavate or remove rock. It is a technique used most often in mining and civil engineering such as dam construction..

We are specialized consultant for revival of old wells & borewells by different ancient and modern methods.these methods are very useful in water conservation and use.

Rainwater harvesting is the technique of collection and storage of rain water at surface or in sub-surface aquifers, before it is lost as surface run-off. The augmented resource can be harvested in the time of need. Artificial recharge to ground water is a process by which the ground water reservoir is augmented at rate exceeding that under natural conditions of replenishment. ADVANTAGES Cost of recharge to sub-surface reservoir is lower than surface reservoirs. The aquifer serves as distribution system also. No land is wasted for storage purpose and no population displacement is involved. Ground water is not directly exposed to evaporation and pollution. Storing water underground is environment friendly. It increases the productivity of aquifer. It reduces flood hazards. Effects rise in ground water levels. Mitigates the effects of drought. Reduces soil erosion.

Applicants(EXISTING/ NEW INDUSTRY/ INFRASTRUCTURE/ MINING) have to register online to apply for Issue of NOC to Abstract Ground Water (NOCAP) We provide service for fresh application, renewal application or expansion application of existing program Fulfilment of all the self-compliance as mentioned in NOC issued by CGWA Preparation of self-compliance report’ Resolving queries raised by CGWA (in case of application is already in process) We have applied for more than 1500 industries to CGWA for groundwater abstraction permission

Water analysis for drinking purpose as well as for industries Water samples for Heavy elements, routine parameters and for C.O.D. & B.O.D.

We are providing Soil testing services to the Industry. We check Soil contamination parameter for Records before Industries Establishment to avoid any disrupt later on with Land owner or Pollution control board. Soil Testing, Sbc Soil Test, SPT, Water Testing, Chemical Testing of Soil, Water etc. SOIL TESTING: parameters are checked in a soil test: Ph Organic Carbon Nitrogen, Phosphorus and Potassium Availability Acidity of the soil Salinity of the soil We are providing Soil testing services to the Industry. We check Soil contamination parameter for Records before Industries Establishment to avoid any disrupt later on with Land owner or Pollution control board. Soil Testing, Sbc Soil Test, SPT, Water Testing, Chemical Testing of Soil, Water etc. SOIL TESTING: parameters are checked in a soil test: Ph Organic Carbon Nitrogen, Phosphorus and Potassium Availability Acidity of the soil Salinity of the soil FIELD CORE CUTTER METHOD

TYPES OF GROUNDWATER CONTAMINATION: Bacteriological contamination (Different types) Microbial contamination (Different types) Chemical contamination (Different types) Organic contamination (Different types) Inorganic contamination (Different types) Environmental contamination (Different types) Different types of contamination to be established by analysis. SOURCE OF CONTAMINATION: Leakage from chemical storage UGS/ GS Landfill site storage areas Waste water lagoons Industrial growth on large scale (Industrial park) Septic systems/ sewer lines Fertilizers/ pesticide/ chemical use by farmers/ industries Contamination needs detail micro-level study in the field for line of action of decontamination remedial measures and accordingly as per suggestions received from hydrological chemists (decontamination expert’s opinion). Necessary action is to be adopted in field.

We design, develop and implement systems and methods to bring turn-key solutions to your land, environment and water management problems. Our highly talent pool of consultants come from diverse fields with enormous professional experience. We strive to provide unmatched technical expertise that provide cost effective solutions and sustainable growth for our clients.

1. HYDROGEOLOGICAL REPORT: This hydrological report describes the available data (gathered with the help of hydrological survey), the hydrologic model setup, model parameterization, results and related uncertainties from the simulations of current and future climate change conditions. 2. ENVIORNMENTAL IMPACT ASSESSMENT (EIA) REPORT: This EIA report provides relevant baseline information of the project area, anticipated impacts to the environment and social aspects, appropriate mitigation measures necessary for incorporation in the project implementation, as well as an environmental management plan. 3. WATER AUDIT REPORT The audit establishes the quantity/volume of water being used, wastage if any, leakages existing, excess use etc., and identifies areas where consumption can be reduced. It critically examines existing treatment systems and practices and recommends changes to improve efficiency and reduce usage.

Flowmeters must be installed perpendicularly to the ground to ensure proper accuracy. Misalignment may cause the O-ring seals to leak and thus reduce the flowmeter's lifetime. Tighten the union nuts only using your bare hands, and refrain from using tools.